View APT60S20B_1169122.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1
2
TO -24 7
1 - Cathode 2 - Anode Back of Case - Cathode
1 2
D3PAK
APT60S20B APT60S20S
200V 200V
75A 75A
1
2
HIGH VOLTAGE SCHOTTKY DIODE
PRODUCT APPLICATIONS
* Parallel Diode * * * * *
-Switchmode Power Supply -Inverters Free Wheeling Diode -Motor Controllers -Converters Snubber Diode Uninterruptible Power Supply (UPS) 48 Volt Output Rectifiers High Speed Rectifiers
PRODUCT FEATURES
* Ultrafast Recovery Times * Soft Recovery Characteristics * Popular TO-247 Package or * Low Forward Voltage
Surface Mount D3PAK Package
PRODUCT BENEFITS
* Low Losses * Low Noise Switching * Cooler Operation * Higher Reliability Systems * Increased System Power
Density
* High Blocking Voltage * Low Leakage Current
MAXIMUM RATINGS
Symbol VR VRRM VRWM IF(AV) IF(RMS) IFSM TJ,TSTG TL EVAL Characteristic / Test Conditions Maximum D.C. Reverse Voltage Maximum Peak Repetitive Reverse Voltage Maximum Working Peak Reverse Voltage
All Ratings: TC = 25C unless otherwise specified.
APT60S20B_S UNIT
200
Volts
Maximum Average Forward Current (TC = 123C, Duty Cycle = 0.5) RMS Forward Current (Square wave, 50% duty) Non-Repetitive Forward Surge Current (TJ = 45C, 8.3ms) Operating and StorageTemperature Range Lead Temperature for 10 Sec. Avalanche Energy (2A, 30mH)
75 208 600 -55 to 150 300 60
C mJ Amps
STATIC ELECTRICAL CHARACTERISTICS
Symbol IF = 60A VF Forward Voltage IF = 120A IF = 60A, TJ = 125C IRM CT Maximum Reverse Leakage Current Junction Capacitance, VR = 200V VR = VR Rated VR = VR Rated, TJ = 125C MIN TYP MAX UNIT
.83 .98 .72
.90
Volts
1 25 300
APT Website - http://www.advancedpower.com
053-6042 Rev C
pF
9-2004
mA
DYNAMIC CHARACTERISTICS
Symbol trr Qrr IRRM trr Qrr IRRM trr Qrr IRRM Characteristic Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current Reverse Recovery Time Reverse Recovery Charge Maximum Reverse Recovery Current IF = 60A, diF/dt = -700A/s VR = 133V, TC = 125C IF = 60A, diF/dt = -200A/s VR = 133V, TC = 125C Test Conditions IF = 60A, diF/dt = -200A/s VR = 133V, TC = 25C MIN TYP
APT60S20B_S
MAX UNIT ns nC
55 160 5 100 490 10 80 1100 27 -
-
Amps ns nC Amps ns nC Amps
THERMAL AND MECHANICAL CHARACTERISTICS
Symbol RJC RJA WT Characteristic / Test Conditions Junction-to-Case Thermal Resistance Junction-to-Ambient Thermal Resistance Package Weight MIN TYP MAX UNIT C/W oz g
.30 40 0.22 5.9 10 1.1
Torque
Maximum Mounting Torque
lb*in N*m
APT Reserves the right to change, without notice, the specifications and information contained herein. 0.35
, THERMAL IMPEDANCE (C/W)
0.30 0.9 0.25 0.7 0.20 0.15 0.10 0.05 0 0.5 0.3 0.1 0.05 10-5 10-4 SINGLE PULSE Note:
PDM t1 t2 Peak TJ = PDM x ZJC + TC Duty Factor D = t1/t2
Z
JC
10-3 10-2 10-1 1.0 RECTANGULAR PULSE DURATION (seconds) FIGURE 1a. MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs. PULSE DURATION
RC MODEL Junction temp (C) 0.0218 C/W 0.00450 J/C
9-2004
Power (watts)
0.119 C/W
0.0119 J/C
053-6042 Rev C
0.160 C/W Case temperature (C)
0.121 J/C
FIGURE 1b, TRANSIENT THERMAL IMPEDANCE MODEL
TYPICAL PERFORMANCE CURVES
200 180
IF, FORWARD CURRENT (A) trr, REVERSE RECOVERY TIME (ns)
120 100 80 60 40 20 0
APT60S20B_S
TJ = 125C VR = 133V
TJ = -55C TJ = 25C
120A 60A
160 140 120 100 80 60 40 20 0 0 TJ = 125C TJ = 150C
30A
0.2 0.4 0.6 0.8 1 1.2 VF, ANODE-TO-CATHODE VOLTAGE (V) Figure 2. Forward Current vs. Forward Voltage
TJ = 125C VR = 133V
0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE(A/s) Figure 3. Reverse Recovery Time vs. Current Rate of Change 35
IRRM, REVERSE RECOVERY CURRENT (A)
TJ = 125C VR = 133V
1800
Qrr, REVERSE RECOVERY CHARGE (nC)
1600 1400 1200 1000 800 600 400 200 0
120A
30 25 20 15 10 5 0
120A
60A
60A
30A
30A
0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 4. Reverse Recovery Charge vs. Current Rate of Change 1.2 1.0 0.8 0.6 0.4 0.2 0.0 IRRM trr Qrr Qrr
0 200 400 600 800 -diF /dt, CURRENT RATE OF CHANGE (A/s) Figure 5. Reverse Recovery Current vs. Current Rate of Change 250
Duty cycle = 0.5 TJ = 150C
Kf, DYNAMIC PARAMETERS (Normalized to 700A/s)
200
trr
IF(AV) (A)
150
100
50
Lead Temperature Limited
25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (C) Figure 6. Dynamic Parameters vs. Junction Temperature 5000
CJ, JUNCTION CAPACITANCE (pF)
0
50 75 100 125 150 Case Temperature (C) Figure 7. Maximum Average Forward Current vs. CaseTemperature
0
25
4000
3000
2000
9-2004
1000
1 10 100 200 VR, REVERSE VOLTAGE (V) Figure 8. Junction Capacitance vs. Reverse Voltage
0
.3
053-6042 Rev C
APT60S20B_S
Vr +18V 0V D.U.T. 30H
trr/Qrr Waveform
diF /dt Adjust
APT20M36BLL
PEARSON 2878 CURRENT TRANSFORMER
Figure 9. Diode Test Circuit
1 2 3 4
IF - Forward Conduction Current diF /dt - Rate of Diode Current Change Through Zero Crossing. IRRM - Maximum Reverse Recovery Current. Zero
1
4
5 3 2
trr - Reverse Recovery Time, measured from zero crossing where diode current goes from positive to negative, to the point at which the straight line through IRRM and 0.25 IRRM passes through zero. Qrr - Area Under the Curve Defined by IRRM and trr.
0.25 IRRM
5
Figure 10, Diode Reverse Recovery Waveform and Definitions
TO-247 Package Outline
Cathode (Heat Sink)
4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 6.15 (.242) BSC 15.49 (.610) 16.26 (.640) 5.38 (.212) 6.20 (.244)
D PAK Package Outline
4.90 (.193) 5.10 (.201) 1.45 (.057) 1.60 (.063) 15.85 (.624) 16.05 (.632) 1.00 (.039) 1.15 (.045) 13.30 (.524) 13.60 (.535)
3
Cathode
20.80 (.819) 21.46 (.845) 3.50 (.138) 3.81 (.150)
18.70 (.736) 19.10 (.752) 0.40 (.016) 0.65 (.026)
12.40 (.488) 12.70 (.500)
4.50 (.177) Max.
9-2004
0.40 (.016) 0.79 (.031)
19.81 (.780) 20.32 (.800)
1.65 (.065) 2.13 (.084) 1.01 (.040) 1.40 (.055)
0.020 (.001) 0.250 (.010) 2.70 (.106) 2.90 (.114)
1.15 (.045) 1.45 (.057)
1.20 (.047) 1.90 (.075) 1.40 (.055) 2.10 (.083) 5.45 (.215) BSC (2 Plcs.)
2.40 (.094) 2.70 (.106) (Base of Lead)
053-6042 Rev C
Anode
2.21 (.087) 2.59 (.102)
Heat Sink (Cathode) and Leads are Plated
Cathode
10.90 (.430) BSC
Dimensions in Millimeters and (Inches)
Anode Cathode Dimensions in Millimeters (Inches)
APT's products are covered by one or more of U.S.patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 and foreign patents. US and Foreign patents pending. All Rights Reserved.

▲Up To Search▲

Price & Availability of APT60S20B

	To Download APT60S20B Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .